The following table is taken, with permission, from issue #38 of Thumper News, the official newsletter of the Four Stroke Singles Nation Owners Club. For more information on FSSNOC and membership application click here.
qnty description | component weight (lb) |
total weight (lb) |
sub-assy weight (lb) |
percent of total (%) |
unsprung weight (lb) |
FRONT WHEEL ASSY 1 front wheel 1 front tire, Dunlop K81: 4.10H19 1 tube 1 brake disk 6 disk mtg bolts 3 disk mtg lock tabs 1 front axle 1 axle spacer 1 speedo drive |
|
|
32.52 |
8.95% |
32.52 |
LEFT FORK LEG 1 fork tube 1 fork slider, left 1 fork dmpr rod, base & bolt 1 fork spring & oil |
|
|
8.80 |
2.42% |
|
RIGHT FORK LEG 1 fork tube 1 fork slider, right 1 fork dmpr rod, base & bolt 1 fork spring & oil |
|
|
8.73 |
2.40% |
|
FRONT BRAKE ASSY 1 caliper assy 1 upper & lower hose & union 1 master cylinder & lever |
|
|
5.12 |
1.41% |
|
TRIPLE CLAMPS 1 lower triple clamp 1 steering bearings 1 upper triple clapm 1 handlebar clamps & bushs |
|
|
7.20 |
1.98% |
|
CONTROLS 1 gages, bracket 1 handlebars 1 swtchs, throttle & clutch lever |
|
|
7.53 |
2.07% |
|
HEADLIGHT & BRACKET 1 headlight shell & ring 1 lamp (stock) 1 bezel & adjuster 2 mounting ears (ea) 1 mounting frame & hardware 1 horn |
|
|
4.91 |
1.35% |
|
FRAME & HARDWARE 1 bare frame 1 eng mtg & misc hardware 1 skid plate 1 oil hoses 1 side stand 1 center stand 1 tool box 1 tool kit |
|
|
51.47 |
14.16% |
|
ENGINE & EQUIPMENT 1 engine 1 shift pedal 1 kick start lever 1 carb mount rubber 1 chain |
|
|
101.76 |
28.00% |
|
CARBUTETOR & FILTER 1 carburetor 1 air box and clamps |
|
|
5.46 |
1.50% |
|
EXHAUST ASSY 1 headpipe 1 muffler |
|
|
17.16 |
4.72% |
|
REAR FENDER 1 chrome fender (rear part) 1 plastic fender (front part) 1 tail lamp assy |
|
|
5.22 |
1.44% |
|
REAR SUSPENSION 1 swing arm 1 bushes, bearings & caps 1 swing arm bolt 1 torque arm |
|
|
11.23 |
3.09% |
|
SHOCKS 2 stock shocks (ea) ref only 2 marzcocchi shocks (ea) 1 mounting hardware |
|
|
7.10 |
1.95% |
|
REAR BRAKE ASSY 1 rear caliper assy 1 brake hose & clamps 1 rear master cylinder 1 pivot shaft 1 pedal |
|
|
6.45 |
1.77% |
|
REAR WHEEL ASSY 1 rear wheel 1 rear tire, Dunlop k81: 4.25/85H18 1 tube 1 brake disk 6 disk mtg bolts 3 disk mtg lock tabs 1 cush drive & sprocket 1 rear axle spacer 1 rear axle & adjusters |
|
|
41.36 |
11.38% |
41.36 |
BATTERY & ELECTRICS 1 battery box & hardware 1 battery 1 ignition module 1 regulator 1 wire harness 1 ignition coil 2 front turn signal (ea) 2 rear turn signal (ea) |
|
|
15.07 |
4.15% |
|
FOOT RESTS 1 main (pair) 1 passenger (pair) |
|
|
4.43 |
1.22% |
|
BODY WORK 1 tank assy 1 seat assy 1 side covers (pair) 1 chain guard 1 front fender |
|
|
20.37 |
5.60% |
|
CABLES 1 clutch & compression release 1 speedo & tach |
|
|
1.54 |
0.42% |
|
TOTAL |
363.43 |
363.43 |
100.0% |
101.77 |
The preceding information was compiled by: Bob Paul, FSSNOC #840 (MD). An accurate Chem-Lab scale was used for all but the frame and motor. The base motorcycle was a 1978 Yamaha SR500. The real usefullness of this excerise may be to give a comparison of stock parts vs. aftermarket items prior to your spending the big bucks for that advertised weight savings. Interesting stuff!